Try connecting it directly to the computer and not via a hub.

If using a USB cable, make sure the cable is connected to both the printer and computer.

STEP B: Make sure the printer is connected to the computer If the LCD shows an error, troubleshoot the error to clear the issue indicated. An example would be 'Paper Jam' or 'Ink/Toner Empty'. NOTE: If you are unable to power on the machine, then this solution does not apply. If it does not, then make sure it is plugged into a working socket and any power switches are turned ON. Check the machine to see if it wakes from sleep mode.

If your Brother machine's screen (hereinafter called LCD) is blank, the machine may not be powered on.

Open the side cover where place the formatter on the right face Here you will se a jumper On your computer delete all hp software Install HP 3055 pcl 6 drivers and select manualy your usb port where is connect the printer ( the printer is always off) Download this: Open the program select your printer and send the firmware (the printer.įollow the steps below to resolve this issue: STEP A: Verify the Brother machine is powered on and there are no errors 05:02:31 Klipper state: Disconnect 05:02:56 Printer is not ready The klippy host software is attempting to connect. That part is up and running, and seems to be able to control klipper enough to yield the following logs in terminal. The printer port is set to /tmp/printer in Octoprint.

Problem also occurs when trying to create a PDF via the print menu.

It is a Windows 7 issue and NOT an Office issue. However, you can print from Word and Excel.

Usblist2.exe printer not ready